Recommended by the latest development of the continental machinery[ 08-14 14:54 ]

 The latest development of the 2400 t,2800 t of patented press: 1.aging treatment: after the main frame of our pressure welding,after the aging treatment,eliminate the internal uneven stress,significantly improve the service life of the compressor frame....

Wide application of new type of veneer hot press[ 08-14 14:51 ]

The use of the hot press in the construction industry is more common. Facing the hot press is also experienced continuous updating and upgrading, and now we see the new type of double veneer hot press, of course, the quality and function of the continuous impr...

Inverter safe usage[ 08-14 14:46 ]

Before the operation of the system,first check the cabinet and inverter fan is operating normally,otherwise the system easy to due to poor ventilation caused by the electrical overheating and burning. When the compressor running in critical condition,to stop ...

LUTONG instruction advantages and disadvantages of single-layer and multilayer hot-lamination machine for you[ 08-14 14:43 ]

The Wuxi Lutong Machinery introduces the difference between the single-layer and multilayer hot-lamination machines for you; compared with the multilayer one, the single-layer hot-lamination machine has advantages in many aspects. At first, the multilayer hot-...

WUXI LUTONG take you to understand common operating instruction of hot-lamination machine[ 08-14 14:34 ]

The hot lamination technology is very simple for these people who are familiar with building templates but possibly unfamiliar for some people of other industries; let's understand the following operating instruction of the hot-lamination machine according to ...

WUXI LUTONG MACHINERY tells you how to select multilayer hot lamination machine[ 08-14 14:30 ]

The hot-lamination machine is more and more popular in industrial applications; beside the quality, personality is also a big advantage for choosing under the competition among different products. The personality choice is the cost performance choice, and also...

The heart of the hot press-control system[ 08-14 14:15 ]

The control system of the hot press is mainly controlled by the heating system and hydraulic system. Its sensitivity and accuracy directly affect the accuracy of the press. Because of the complexity of the control part,it is often the site of the problem. For ...

Hot press used in the furniture industry[ 08-14 14:14 ]

Along with the wood especially precious wood resource reduced furniture more and more use of paste veneer or stickers isobaric process,as pressed an important device in the process of hot pressing machine in the furniture manufacturing often used for the venee...

Hot press inspection notice[ 08-14 14:10 ]

Use hot press machine to be in accordance with the standard operation,to ensure the safety of the machine and personnel. The inspection is the key point of the safety standard: 1.every 4 hours to check the motor,reducer,bearing heat,lubrication,transmission,s...

Mechanical presses[ 08-12 11:31 ]

In the past small mechanical veneer presses were made from cast iron with a hand screw to apply pressure to flat plates. Commercially built mechanical veneer presses, large enough to take a tabletop, use hydraulic rams to apply even pressure to the platens. F...

How to maintain and maintain the daily maintenance of the hot press[ 08-12 11:19 ]

1.machine should be responsible for the management of a person; 2.machine can not work,find fault and remove; 3.every three to six months to replace a hydraulic oil (depending on the oil level and set),the replacement of large,small tank wall, filter oil fil...

Basic introduction and characteristics of hot press[ 08-12 11:07 ]

When we use the hot press,we must clearly the use of hot press,not because of a small mistake to pose a threat to life. On this,Lu machinery factory to remind the majority of workers have to pay attention to some points:1,we must close the power switch to open...